RESUMO
In European industry, such as metallurgical, mining and processing, construction, food, and chemical, vibration exciters are used, which indicates their wide and, in some cases, unique technological capabilities. The most common are electromagnetic and unbalanced vibration exciters. The advantages of electromagnetic vibration exciters include the ability to control the amplitude of the vibration by changing the electrical power supplied; the disadvantages are high material consumption. However, unbalanced vibration exciters have low energy efficiency, which is associated with difficult start-up conditions and with an overestimated mechanical power of the vibration exciter in relation to the power required by the technology itself, which is due to the need to minimize the effect of the technological load on the operating mode of the vibrating unit. Adjusting the amplitude of the disturbing force of unbalanced vibration exciters, regardless of the vibration frequency, will make it possible to reduce the installed power of the unit by passing the resonant frequency with a minimum disturbing force and compensating for the effect of the process load by means of a closed-loop electric drive. In the course of the study, an analytical description of the interaction of the rotating unbalances located on a common movable platform was obtained. On the basis of these analytical dependencies, a mathematical model was developed that takes into account the dynamic characteristics of a frequency-controlled asynchronous electric drive of a closed-loop control system for the mutual arrangement of rotating unbalances. The simulation results confirmed the possibility of using the specified electric drive to control the oscillation amplitude directly in the process of operation of a four-unbalanced vibration exciter. A physical experiment was carried out to determine the transient processes of changing the angular velocity of an induction motor with an abrupt change in the frequency converter setting. On the basis of this experiment, the previously created mathematical model was refined in terms of describing the dynamic parameters of the electric drive. The proposed structure of the control system, the performance of which has been confirmed by mathematical modeling, makes it possible to implement an adjustable four-unbalanced vibration exciter using single commercially available asynchronous vibrators.
RESUMO
The study relates to the use of automated plant protection systems in agriculture. The article presents a proprietary automated mobile platform with an aerosol generator of hot mist. Furthermore, the cause of the loss of a chemical preparation in the spraying of plant protection products on the tree crown was determined in the course of field research. A statistical analysis of the results of experiment was carried out and the effect of droplet size on leaf coating density was determined. The manuscript presents a diagram of the degree of penetration of the working solution as it drops into the crown of the tree, as well as a cross-sectional graph of the permeability of the spray from the projection of the fruit tree crown. The most effective modes of operation of the automated mobile platform for spraying plant protection products with a mist generator aggregate were established. Analysis of the results shows that the device meets the spraying requirements of the procedure for spraying plant protection products. The novelty of this research lies in the optimal modes identified by movement of the developed automated mobile platform and the parameters of plant treatment with protective equipment when using a hot mist generator. The following mode parameters were established: the speed of the automated platform was 3.4 km/h, the distance to the crown of the tree was 1.34 m, and the flow rate of the working fluid was 44.1 L/h. Average fuel consumption was 2.5 L/h. Effective aerosol penetration reduced the amount of working fluid used by up to 50 times.
